- Four measuring ranges from 50 mm up to 1,000 mm
- Very high linearity of up to ± 0.5 mm
- CMOS receiving element enables accurate distance measurement independent of color or shininess
- Red laser
- Scaleable analog and switching output
- Display with easy to use setup menu
- Advanced settings (e.g., averaging function, external laser-off, etc.)
- Reliable, precise measurement, independent of surface, increases production quality
- Reliable and consistent measurements, regardless of color, reduce changeover time
- Advanced settings provide increased application flexibility to easily solve customer-specific applications
- Fast commissioning via button, remote or numerical teach
- Easy, precise alignment and verification based on red laser light and LC display, decreasing commissioning time
- Tough metal housing permits operation in harsh environments
Measuring range | 50 mm ... 1,000 mm 1) |
Resolution |
100 µm ... 500 µm 1) 1,000 µm 1) 2) |
Repeatability |
0.5 mm/0.25 mm/0.125 mm 1) 3) 4) 1 mm / 0.5 mm / 0.25 mm 1) 3) 4) 2 mm / 1 mm / 0.5 mm 1) 3) 4) 10 mm / 5 mm / 2.5 mm 1) 2) 3) 4) |
Response time | 2,5 ms / 10 ms / 40 ms, 5 ms / 20 ms / 80 ms 3) |
Measuring frequency | 400 Hz / 200 Hz |
Switching output |
1 x PNP (100 mA) 5) 1 x NPN (100 mA) 5) |
Ambient temperature |
Operation –20 °C ... +55 °C 6) Storage –40 °C ... +60 °C |
Data interface | 1 x 4 mA ... 20 mA (< 300 Ω) |
1) 6 % ... 90 % remission.
2) The models with measuring range of 100 mm ... 1,000 mm meets the specification of the models with measuring range of 100 mm ... 1,000 mm for distances
< 600 mm.
3) Dependent on the averaging setting: fast/medium/slow.
4) When calibrated in the application regularly.
5) PNP: HIGH = VS - (< 2 V) / LOW = < 2 V, NPN: HIGH = < 2 V / LOW = VS.
6) Operating temperature at VS = 24 V.
Inquiry - DT20 Hi