S3000 Remote

Share:


S3000 Remote



At a glance

  • Can be used only in the EFI system network, e.g. with a Flexi Soft safety controller or another safety laser scanner
  • 4 m, 5.5 m or 7 m protective field range
  • Up to 32 switchable field sets
  • Configuration memory integrated in the system plug
  • Measured data output via RS-422
  • Simultaneous monitoring of up to 4 protective fields
  • Contour as reference for vertical applications

Your Benefits

  • Easy installation, commissioning and maintenance for stationary and mobile applications
  • Large protective field range of 7 m enables a large variety of applications
  • Variety of field sets ensures safety and productivity when protecting vehicles or moving machine parts
  • Quick recommissioning via configuration memory
  • Modular expansions, low wiring effort and additional functions such as the simultaneous monitoring of up to four protective fields using a SICK safety controller via EFI
  • Navigation support and personal protection in one device
  • Decades of proven safety technology guarantee maximum reliability and availability – even under difficult conditions

The scanner for more safety

 

The S3000 Remote is an unbeatably cost-effective scanner for the complete protection of automatic guided vehicle systems and complex production and handling systems. In combination with other safety laser scanners, it provides optimum, efficient monitoring for all areas. The S3000 Remote uses an EFI interface to access the inputs and even incremental encoders on other devices. This extends the interoperability of the S3000 Remote with other safety laser scanners and safety controllers from SICK. The system plug with built-in configuration storage enables rapid device replacement without using a laptop. The functions of the scanner network system can be easily configured and diagnosed in the CDS user interface (Configuration & Diagnostic Software).

Technical data overview

Note Can be used only in the EFI system network, e.g. with a Flexi Soft safety controller or another S300 or S3000 safety laser scanner
Protective field range 4 m / 5.5 m / 7 m
Warning field range 49 m
Scanning angle 190°
Number of fields 64
Number of monitoring cases 32 1)
Resolution  30 mm, 40 mm, 50 mm, 70 mm, 150 mm, configurable
OSSD pairs 1
Response time 60 ms 2)
Safe device communication EFI
1) The performance characteristics of the Remote device correspond to those of the host. If the system exclusively consists of Remote devices connected to an EFI partner, 16 dual field sets or 10 triple field sets and 32 monitoring cases are available. For monitoring case switching static or dynamic inputs of the EFI partner have to be used.
2) Depending on basic response time and multiple sampling.
 


 Inquiry - S3000 Remote