KT10

Share:


KT10



At a glance

  • Very low jitter (< 10 μs)
  • Precise light spot
  • Best contrast resolution thanks to RGB LED technology
  • Two interchangeable light exits
  • Five storage banks for settings
  • Automatic drift correction
  • Fast switching frequency of 25 kHz
  • Easy-to-read bar graph display

Your Benefits

  • Very precise detection of print marks enables optimal results for packaging and printing applications
  • All contrast marks, even pale yellow on white paper, can be reliably detected thanks to RGB LED technology
  • Automatic drift correction helps detect difficult to see marks, such as faded print marks, enabling higher production reliability
  • Reliable operation, even with high-gloss reflective surfaces, increasing throughput
  • Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time
  • Long-lasting, tough metal housing

Technical data overview

Dimensions (W x H x D) 30.4 mm x 53 mm x 80 mm
Sensing distance 12.5 mm 1)
Dependent on the fiber-optic cable
10 mm 1)
Type of light LED, RGB 2)
LED, RGB
Switching frequency 25 kHz 3)
Response time 20 µs 4)
Adjustment Dynamic teach-in (min/max) / Static 2-point teach-in / Dynamic teach-in (min/max)
Connection type Male connector M12, 5-pin
1) From front edge of lens.
2) Average service life: 100,000 h at TU = +25 °C.
3) With light/dark ratio 1:1.
4) Signal transit time with resistive load.

 Inquiry - KT10